Sensors that go the distance...

The Thin Door/Window Contact is designed for use on doors, windows, and other objects that open and close.. When the magnet (which is mounted near the sensor) moves away from or closer to the door contact’s sensor, signals are transmitted to the control panel.

The door contact also has an external input that accepts connections from normally-closed (NC) dry contact devices. For added protection, it is also equipped with a cover tamper to keep out prying eyes.

Features

For narrow applications, sensor is only 3/4″ wide

Fully supervised

Rare earth magnet

Supports internal and external contacts

Can be used for 2 zones of protection

Lithium battery

ETL listed

The 2GIG Recessed Door Contact is the industry’s most flexible supervised door contact. It communicates with the 2GIG Control Panel using the 345 MHz wireless frequency. It also allows a multitude of applications while hiding the transmitter within a door or window frame.

Features

Recessed Door Contact

Compact size, only 2-1/2″ long

Fully supervised

Rare earth magnet

Lithium battery

ETL listed

2GIG-BypassSensor-DW40.jpg

The Bypass Door/Window Contact is designed for use on doors that may need to be temporarily bypassed to serve as an entry and exit path to an armed zone.

A special coded message is sent to compatible receivers that can log this local user bypass event. An integrated LED indicates to the user, the state and status of the bypass feature. For higher security, the bypass push button can be disabled and the contact can be used as a micro sized door window contact without the local bypass feature.

Features

Wireless signal range: 275 ft (80 m) with 2GIG Panel

Code outputs: alarm; alarm restore; supervisory; low battery; tamper; tamper restore; local bypass enabled*; local bypass disabled*

Transmitter frequency: 345 MHz (crystal controlled)

Supervisory interval: 70 minutes

2GIG Motion Detector.jpg

The 2GIG Passive Infrared Motion Detector is a wall-mounted unit with wide-angle motion protection.

It communicates with the control panel using the 345 MHz frequency. When set to High (HI) Sensitivity Mode, the PIR has a maximum range of 30 ft deep x 50 ft wide (9.1 m x 15.2 m). The PIR’s pet-immune feature can be set to tolerate animals up 55 lbs.

Features

Dual element sensor with 30 ft. by 50 ft. range

33 or 55 lb. pet immune

90-degree look down

110˚ spread

3 different mounting brackets

Tamper protected

Fully supervised

Lithium battery

ETL listed

 

The Glass Break Detector is a fully-supervised, tamper-protected, ceiling- or wall-mounted unit. It communicates with the 2GIG Control Panel using the 345 MHz frequency. The detector provides a 15 ft (4.6 m) maximum detection range, 360° maximum horizontal sensing angle, and dual-stage glass break detection.

Features

Monitors for the sound of breaking glass

Two test LEDs

Dual shatter recognition technology

360˚ range

Tamper protected

Fully supervised

Lithium battery

ETL listed

 

The Image Sensor offers traditional motion detection combined with visual confirmation of why the motion sensor was activated.

Features

PIR Motion Detection

ETL certified for UL 639

Wireless connectivity for easy installation.               Configurable PIR sensitivity including pet immunity

Image Capture

Resolution: 320×240 (QVGA) Color camera                                    Night vision w/IR illumination in black and white.                            Receive email or MMS alerts with images attached

The 2GIG 4‐Button Keyfob Remote communicates with the 2GIG Control Panel on the 345 MHz frequency. It gives users the ability to turn the security system ON and OFF before entering the home or after exiting. If there is an emergency, you can turn on the siren and automatically call the central monitoring station. Keyfobs can be programmed to operate the programmable output in the Control Panel. Use with the 2GIG Universal Garage Door Receiver (2GIG‐GDR1‐345) to open a garage door. The keyfob is a lithium coin battery‐powered, wireless keyfob designed to fit on a key chain, in a pocket, or in a purse.

Features

Arms system in STAY or AWAY mode

Disarms system

Auxiliary output and emergency functions

Lithium Coin Battery Life of 5 Years                                                                                                                                                                                                                                                                                                                                                                                                                                    

Resolution Products Trident Enviroment Sensor

Features

Tri-Mode Environmental Sensing:

Flood, high and low temp  Freeze – for Furnace Failure – Under 40 degrees F 

Overheat – for Furnace runaway or Air Conditioning failure – Over 100 Degrees F                                    

3 unique wireless IDs or Loops: one for each function.         Cover and wall tamper.     

3-5x more range than competing “puck” style sensors.  

5 year battery life on CR123A battery.              

IP67 waterproof rating     

2.43 x 2.48 x 1.17 inches

 

The Panic Button Remote is a compact, battery powered, wireless panic button that transmits an Emergency signal from any location within radio frequency (RF) range of the control panel. The signal can be transmitted to the control panel, whether the security system is armed or disarmed.

Features

For triggering emergency alarm

Dimensions: 1.65 x 1.20 x 0.50 in. (LxWxD)

Weight: 0.45 oz. (including battery)

5-second button lockout

Lithium battery with 3 years life

Completely water resistant

Supervised

Mounting options: lanyard, wristband, wall mount, belt clip, car-visor clip                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             

The 2GIG Flood/Temperature sensor monitors the ambient temperature and will detect a wet/dry flood condition. The sensor reports wet/dry conditions and temperature to the panel.

Flood Conditions

Once the sensor probe detects the presence of water for three (3) minutes, the integral transmitter will send a wet alarm transmission to the security/control panel. The probe will also send a restore (dry) report when the presence of liquid is no longer detected by the flood probe for three (3) minutes. For flood reporting, the sensor requires the installation of the supplied external flood probe. The sensor is capable of detecting clean or dirty fresh water, salt water, or tap water.

Detects standing water that reaches the sensor probe and notifies the panel

Sends trouble alert to the panel when the ambient temperature exceeds 84 deg. F

Sends trouble alert to the panel when the ambient temperature falls below 42 deg. F

Ships with long life lithium battery life (typical battery life of 5 years)

ETL listed

                                                                                                                                                                                                                                                  

The 2GIG Doorbell is a dual-purpose doorbell that can be installed with the dwelling’s existing 24 V wiring or using the 345 MHz radio frequency:

Wired Installation. When installed as a wired doorbell with the home’s existing 24 AC wiring, the bell is fully water-resistant and the push button remains illuminated.

Wireless Installation. When installed as a wireless doorbell, it features a fully water-resistant button. The push button does not remain illuminated.

Features

Smooth, modern design

White UV-resistant plastic

Simple wireless installation (can be hard-wired)

Surface mount

350 ft. range (open air)

Doorbell can illuminate Z-Wave lights when engaged

Compatible with Scenes or Rules

Receive text/email from Alarm.com when doorbell engaged

Weatherproof seal included

Resolution Products Flood/Temperature Sensor

Features

Tri-Mode Environmental Sensing:
 

Flood/Moisture Sensor

Freeze – for Furnace Failure
Overheat – for Furnace runaway or Air Conditioning failure.

3 unique wireless IDs or Loops: one for each function

Cover tamper.

Strong, reliable RF signal.

5 year battery life on CR123A battery.

Low Battery indication.

3.3×1.4×1.1 inches.

Resoulutions Products Driveway Sensor.jpg

Resolution Products Driveway Sensor

Fully Supported by the 2GIG panels gives you instant notification when you want to know before someone knocks on your door!

If you have a hard to see driveway or just want the notification of sensing vehicles passing by this is the simple inexpensive solution.

Sensor continuously monitors earth’s magnetic field. When the large metal mass of a vehicle drives by, the earth’s magnetic field is twisted. The sensor then transmits a signal to the control panel, and may even be used to automate your perimeter lighting or other controlled devices.

Immune to pets, wildlife, leaves, dust, sunlight.

NO DIGGING!

Weatherproof design handles all environments.

Strong, reliable RF signal.

3-5 year battery life on C batteries.